Wire rope clamps, also known as wire rope clamps and cat claws, are mainly used to bundle wire rope diameters. In order to ensure the safety of use, the installation of the wire rope clamp needs to follow the relevant regulations.
1. The number of wire rope rope clamps is generally no less than 3-5.
2. The wire rope clamp should buckle the clamp seat on the working section of the wire rope, and buckle the U-shaped bolt on the tail section of the wire rope.
3. The wire rope rope clamps shall not be arranged alternately on the wire rope.
4. The distance between the wire rope clamps is equal to 6-7 times the diameter of the wire rope.
5. When tightening the rope clamps, consider the reasonable force of each rope clamp, and the rope clamps farthest from the loop shall not be fastened separately first.
6. The wire rope clamp closest to the loop should be as close as possible to the loop.
